Oil and petrol resistant sleeves

Oil and petrol resistant sleeves

MBS sleeves (oil and petrol-resistant) with thread reinforcement are used for suction and pressure, ideal for filling and releasing tanks of refueling vehicles with lead-free fuel.

View. 1064


To order « Back

DETAILS

Oil and petrol resistant sleeves with a braid. MBS sleeves (oil and petrol-resistant) with thread reinforcement are used for suction and pressure, ideal for filling and releasing tanks of refueling vehicles with lead-free fuel. Ideal for industrial oils, diesel oils, heating oils, mineral oil-based hydraulic oils. The oil and petrol resistant sleeve is also suitable for use in the petrochemical industry.

Operating Temperature: -30 ° C / + 90 ° C

Safety factor: 3.15: 1

Inner layer: rubber based on natural rubber, black, smooth, electrically conductive. Reinforcement: textile liners, braid (nominal size greater than 3 inches, winding) from viscose yarn. Outer layer: rubber made of chloroprene rubber, black, electrically conductive, abrasion resistant, oil and weather resistant.

Operating pressure from 1.6 MPa (16 kgf / cm2) to 4.0 MPa (40 kgf / cm2);

The sleeves are available in 2 designs: – braided – length up to 2 m (inner diameter from 4 to 50 mm), – winding – length as agreed with the customer (inner diameter from 4 to 50 mm).


OUR ADVANTAGES