The efficiency of the transportation process largely depends on the quality of the conveyor belt – and we are responsive to the needs of our customers.

Our transport and elevator belts are designed to move various loads – both bulk and piece, packaged (sand, gravel, dolomite, salt, clay, coal, coke, concrete – not a complete list of what is transported using conveyor belts) and found application in most sectors of modern industry, in agriculture and construction.

Conveyor and elevator belts in Uzbekistan

All tapes pass strict quality control and are made according to GOST 20-85 and DIN 22102.

Warranty period for general-purpose and frost-resistant tapes is 12 months, heat-resistant types T1 and T2 – 4 months, T3 – 3 months.

According to your wishes, we can produce conveyor belts of the following sizes:

• Width from 300 to 1200 mm;
• Bay up to 150 linear meters;
• Thickness from 4 to 40 mm.;

Conveyor belts are widely used in mining and metallurgical enterprises, in the food industry and agro-industrial complexes, in the production of building materials, in cement concrete, waste processing and asphalt plants, in the woodworking industry (transportation of timber, sawmills), lifting, loading and unloading conveyors.

Rubber-fabric conveyor belts for general use, for heavy, medium and light conditions:

• Conventional (from -45 ° С to + 60 ° С);
• Frost-resistant (from -60 ° С to + 60 ° С);
• Heat resistant (from -45 ° С to + 100 ° С);
• Hardly flammable (from + 150 ° С to + 200 ° С).;

Specialized rubber conveyor belts with desired properties:

• Acid resistant for chemical plants;
• Food (light and oil and grease-resistant);
• With increased wear resistance based on natural rubber;
• With antistatic properties;
• With dielectric properties;

GOST 5375-79

Height: 42 cm.
Size: 247-300
(39-47)

5 pairs per pack.
Protect from mine water, mechanical influences with an energy of 15 J. Internal textile lining, grooved sole, heel. Rubber miner’s boots protect from mine water, mechanical influences with energy of 15 J. Internal textile lining, grooved sole, heel. They have a number of shockproof properties: semi-ebonite toe cap, ribbed amplifiers on the front of the boot and in the ankle joint.

They are used in the mining industry, in mines and mines.

2F TECHNOLOGY GROUP LLC offers a wide selection of rubberized fabrics with non-curable and curable polymer coating, as well as fabrics with various rubber coatings used in the petrochemical, defense, medical and other industries, in the manufacture of emergency equipment, inflatable elements, medical products and appliances.

Rubberized fabrics of our production are distinguished by best-in-class performance and quality, which allows us to consider them as materials with improved characteristics to replace traditionally used materials.

Materials:

• Cotton
• A mixture of cotton and polyether
• Nylon
• Polyester
• Silk
• Tire cord

Coating Methods:

• Saturation / Immersion Coating
• Spreading
• Calendering

Thickness

2F TECHNOLOGY GROUP LLC will produce the material in accordance with the technical specifications of the customer:

• Surface lining material – from 0.20 mm to 7.00 mm
• Unlined rubber material – 0.20 mm to 3.50 mm

Quality and certification

All rubberized fabrics are thoroughly tested for compliance with detailed specifications in production quality assurance laboratories, including the central laboratory. 2F TECHNOLOGY GROUP LLC is certified according to ISO 9001-2011 standards and has significant experience in manufacturing products in strict accordance with the requirements of various standards.

V-belts are flexible power elements of V-belt drives.

Being the most common type of drive belts, V-belts, i.e. belts having a trapezoidal cross-sectional profile, the angle of which should coincide with the pulley angles, are widely used in drives of various types of equipment:

• agricultural machinery;
• industrial equipment;
• in ventilation equipment;
• in various compressors;
• In car transmissions;
• in construction equipment and tools;
• In office and household appliances.

The use of 2F TECHNOLOGY GROUP LLC for the manufacture of V-belts in Uzbekistan of high-modulus polyester fabrics and rubbers based on chloroprene rubbers, as well as original technological solutions make it possible to provide the following characteristics:

• high strength indicators;
• dimensional stability over the entire period of operation;
• antistatic characteristics;
• resistance to industrial oils;
• heat resistance.

To order a V-belt:

• know the size of the belt – usually it is enough to read the markings applied to the non-working (upper) part
• if the size of the belt is unknown, and the marking is missing or, for example, has been erased, then for the correct selection of the belt it is necessary to measure the following dimensions:
• widest
• height (thickness)
• belt length (preferably on the outside, but also on the inside)

High rubber boots

GOST 5375-79

Height: 40 cm.

Size: 247-307

(39-47)

7 pairs per pack.

High rubber boots protect against water, weak solutions of inorganic acids and alkalis. Internal textile lining, grooved sole, heel.

They are used in industry and in everyday life. Waterproof.

Domestic enterprises produce two types of insulation tape: CE (cotton) and PVC (polyvinyl chloride). These types of electrical tape are designed to insulate wires and cables during the repair and splicing of electrical cables with non-metallic sheaths operating in a static state.

2F TECHNOLOGY GROUP LLC offers the following type of electrical insulation tape at affordable prices and in the required quantity.

СOTTON ELECTRICAL TAPE (CE TAPE)

       CE TAPE insulating tape is efficient at temperatures from – 30 ° C to + 30 ° C. This insulating tape is made of severe calico, calico or other fabrics that ensure compliance with the requirements of TU 38.305-8-392-2000, with one or two-sided rubber coating. The most widely used is insulating tape of grade 2 POL grade CE TAPE with a double-sided rubber coating of ordinary stickiness. The thickness of the electrical tape is 0.4 mm, the width is 20 ± 1 mm.
The appearance and physical and mechanical properties of electrical tape must comply with the requirements indicated in the table:

CB insulating tape must be strong and withstand electrically test voltage of at least 1000V.
HB tape and PVC tape are stored in closed warehouses at temperatures from + 5 ° С to 35 ° С and relative humidity up to 80% at a distance of at least 1 m from heating appliances. It is not allowed to store the tape together with organic solvents, acids, chemicals and other aggressive media.
The warranty shelf life of the tape is 10 years from the date of manufacture.
The warranty shelf life of the tape in the field is 3 years from the date of manufacture.

Depending on the operating environment (most often these are mineral oils and various hydraulic fluids), hydraulic cuffs are made of various materials. In some cases, it makes sense to replace the rubber with polyurethane, since it has improved wear resistance characteristics.

Cuffs for the hydraulic cylinder are divided into several types depending on the particular conditions of work and operation of the equipment. Hydraulic cuffs can withstand pressure up to 1000 bar at an ambient temperature of -70 to 250 ºС.

The structural features of reinforced rubber hoses provide excellent flexibility, preservation of the inner cross-section of the hose during bending, high strength, wear resistance and mechanical resistance of the hose.
Reinforced sleeves (hoses) are made in various design and technological options and various sizes, which allows you to successfully solve many technical problems in construction and operational processes. Hoses are widely used all over the world in many industries – such as oil, oil refining, chemical, pharmaceutical, food, woodworking, marine, in transport, in geology and exploration, in various construction, in public utilities, in structural units of machines, machine tools, aggregates, etc.
Reinforced sleeves (hoses) are indispensable for pumping water, various food and non-food mixtures and liquids, chemicals, transporting bulk materials through hoses, chips, waste, various gases, steam, dust, air, as well as for laying electric, telephone, computer and other networks.

Raw rubber and rubber compounds are used in the manufacturing processes of a variety of rubber products. From raw rubber produce various products used to seal mechanical fixed joints. From rubber mixtures receive technical parts used in various sectors of the economy.

Our company produces these materials in the form of a continuous tape or sheets (rolled) and in the form of a web (calendered). They can be for medical and food purposes, dielectric, electrically conductive, adhesive, heat-resistant, frost-resistant, oil-resistant, acid-base resistant.

Crude rubber in Uzbekistan

Their composition includes rubber, stabilizers, fillers, vulcanization agents, plasticizers. The composition is determined by the purpose of the mixtures, the main characteristics are determined by the type of rubber, which is the main component.

Vegetable oils, wax, stearic acid, resins (coniferous and coal), and rosin can be used as plasticizer softeners. Carbon black, zinc oxide, magnesium carbonate, etc. can serve as fillers.

Production

Our company produces more than 500 types of raw rubber compounds. We also have the opportunity to make any rubber mixture according to your parameters.

Adhesives obtained by dissolving rubber or rubber in organic solvents (gasoline, ethyl acetate, etc.). Almost all rubbers can be used to make rubber adhesives. Depending on the temperature at which the adhesive compound is formed, rubber glue is distinguished between high-temperature or hot (usually above 100 ° C), and low-temperature or cold, vulcanization, the latter are also called self-vulcanizing. Rubber adhesives are prepared by mixing the components in special devices, the so-called glue mixers. Self-vulcanizing rubber adhesives are supplied in two solutions (one containing rubber or a mixture with some ingredients, the other a highly active vulcanizing system), which are mixed before application of the adhesive. The main characteristics of adhesive joints (strength during delamination and tearing, resistance to aggressive media, moisture, heat and frost resistance, etc.) depend mainly on the type of rubber.

Rubber adhesives are used in the assembly and repair of rubber and rubber-fabric products, in the production of rubberized fabrics, for fastening rubber to metal, wood, cement, glass, etc.