The efficiency of the transportation process largely depends on the quality of the conveyor belt – and we are responsive to the needs of our customers.

Our transport and elevator belts are designed to move various loads – both bulk and piece, packaged (sand, gravel, dolomite, salt, clay, coal, coke, concrete – not a complete list of what is transported using conveyor belts) and found application in most sectors of modern industry, in agriculture and construction.

Conveyor and elevator belts in Uzbekistan

All tapes pass strict quality control and are made according to GOST 20-85 and DIN 22102.

Warranty period for general-purpose and frost-resistant tapes is 12 months, heat-resistant types T1 and T2 – 4 months, T3 – 3 months.

According to your wishes, we can produce conveyor belts of the following sizes:

• Width from 300 to 1200 mm;
• Bay up to 150 linear meters;
• Thickness from 4 to 40 mm.;

Conveyor belts are widely used in mining and metallurgical enterprises, in the food industry and agro-industrial complexes, in the production of building materials, in cement concrete, waste processing and asphalt plants, in the woodworking industry (transportation of timber, sawmills), lifting, loading and unloading conveyors.

Rubber-fabric conveyor belts for general use, for heavy, medium and light conditions:

• Conventional (from -45 ° С to + 60 ° С);
• Frost-resistant (from -60 ° С to + 60 ° С);
• Heat resistant (from -45 ° С to + 100 ° С);
• Hardly flammable (from + 150 ° С to + 200 ° С).;

Specialized rubber conveyor belts with desired properties:

• Acid resistant for chemical plants;
• Food (light and oil and grease-resistant);
• With increased wear resistance based on natural rubber;
• With antistatic properties;
• With dielectric properties;

GOST 5375-79

Height: 42 cm.
Size: 247-300
(39-47)

5 pairs per pack.
Protect from mine water, mechanical influences with an energy of 15 J. Internal textile lining, grooved sole, heel. Rubber miner’s boots protect from mine water, mechanical influences with energy of 15 J. Internal textile lining, grooved sole, heel. They have a number of shockproof properties: semi-ebonite toe cap, ribbed amplifiers on the front of the boot and in the ankle joint.

They are used in the mining industry, in mines and mines.

2F TECHNOLOGY GROUP LLC offers a wide selection of rubberized fabrics with non-curable and curable polymer coating, as well as fabrics with various rubber coatings used in the petrochemical, defense, medical and other industries, in the manufacture of emergency equipment, inflatable elements, medical products and appliances.

Rubberized fabrics of our production are distinguished by best-in-class performance and quality, which allows us to consider them as materials with improved characteristics to replace traditionally used materials.

Materials:

• Cotton
• A mixture of cotton and polyether
• Nylon
• Polyester
• Silk
• Tire cord

Coating Methods:

• Saturation / Immersion Coating
• Spreading
• Calendering

Thickness

2F TECHNOLOGY GROUP LLC will produce the material in accordance with the technical specifications of the customer:

• Surface lining material – from 0.20 mm to 7.00 mm
• Unlined rubber material – 0.20 mm to 3.50 mm

Quality and certification

All rubberized fabrics are thoroughly tested for compliance with detailed specifications in production quality assurance laboratories, including the central laboratory. 2F TECHNOLOGY GROUP LLC is certified according to ISO 9001-2011 standards and has significant experience in manufacturing products in strict accordance with the requirements of various standards.

V-belts are flexible power elements of V-belt drives.

Being the most common type of drive belts, V-belts, i.e. belts having a trapezoidal cross-sectional profile, the angle of which should coincide with the pulley angles, are widely used in drives of various types of equipment:

• agricultural machinery;
• industrial equipment;
• in ventilation equipment;
• in various compressors;
• In car transmissions;
• in construction equipment and tools;
• In office and household appliances.

The use of 2F TECHNOLOGY GROUP LLC for the manufacture of V-belts in Uzbekistan of high-modulus polyester fabrics and rubbers based on chloroprene rubbers, as well as original technological solutions make it possible to provide the following characteristics:

• high strength indicators;
• dimensional stability over the entire period of operation;
• antistatic characteristics;
• resistance to industrial oils;
• heat resistance.

To order a V-belt:

• know the size of the belt – usually it is enough to read the markings applied to the non-working (upper) part
• if the size of the belt is unknown, and the marking is missing or, for example, has been erased, then for the correct selection of the belt it is necessary to measure the following dimensions:
• widest
• height (thickness)
• belt length (preferably on the outside, but also on the inside)

The structural features of reinforced rubber hoses provide excellent flexibility, preservation of the inner cross-section of the hose during bending, high strength, wear resistance and mechanical resistance of the hose.
Reinforced sleeves (hoses) are made in various design and technological options and various sizes, which allows you to successfully solve many technical problems in construction and operational processes. Hoses are widely used all over the world in many industries – such as oil, oil refining, chemical, pharmaceutical, food, woodworking, marine, in transport, in geology and exploration, in various construction, in public utilities, in structural units of machines, machine tools, aggregates, etc.
Reinforced sleeves (hoses) are indispensable for pumping water, various food and non-food mixtures and liquids, chemicals, transporting bulk materials through hoses, chips, waste, various gases, steam, dust, air, as well as for laying electric, telephone, computer and other networks.