Technical plates Heat-oil-acid-alkali resistant in Uzbekistan

Scope: It is intended for the manufacture of rubber products used to seal fixed joints, prevent friction between metal surfaces, to perceive single shock loads, and also as gaskets, decks and other non-sealing joints.

Working environment: Air of premises, capacities, vessels; nitrogen, inert gases at a pressure of 0.05 to 0.4 MPa or fresh, marine, industrial, waste water without organic solvents and lubricants; salt solution with a concentration up to the saturation limit; acids, alkalis with a concentration of not more than 20% at a pressure of 0.05 to 10.0 MPa. Temperature from -45 ° С to + 80 ° С.

Note: A plate longer than 5000 mm is supplied as agreed with the customer.

Rubber fabric plate (type II) and rubber (type I) heat and frost acid and alkali resistant (GOST 7338-90)

Scope: It is intended for the manufacture of rubber products used to seal fixed joints, prevent friction between metal surfaces, to perceive single shock loads, and also as gaskets, decks and other non-sealing joints.

Working environment: Air of premises, capacities, vessels; nitrogen, inert gases at a pressure of 0.05 to 0.4 MPa or fresh, marine, industrial, waste water without organic solvents and lubricants; salt solution with a concentration up to the saturation limit; acids, alkalis with a concentration of not more than 20% at a pressure of 0.05 to 10.0 MPa. Temperature from -45 ° С to + 80 ° С.